DUDLEY DIX YACHT DESIGN

Argie 10

Stitch & Glue Plywood

LIST OF MATERIALS

This material list is for building with polyester resin, as was normal when this boat was designed. It is now more normal to use epoxy resin and fillets. To build with epoxy, replace the first 4 items under "Sundries" with the epoxy materials list.

6mm (1/4") Plywood
3 sheets 1220x2440mm (4'x8')

Meranti or similar
8x40mm (5/16"x1 1/2") - 6 of 3.5m (6 of 12')
13x13mm (33/64"x33/64") - 1m (4')
13x20mm (33/64"x3/4") - 3m (10')
15x30mm (5/8"x1 1/4") - 4m (13')
20x20mm (3/4"x3/4") - 18m (60')
20x40mm (3/4"x1 1/2")- 2m (7')
20x50mm (3/4"x2") - 0,5m (2')
20x130mm (3/4"x5") - 0,3m (1')

Sundries
Balcotan 100 glue - 1 bottle (polyurethane single part adhesive)
50mm (2") Fibreglass tape - 35m (115')
Polyester general purpose resin - 2kg (5lb)
MEK (hardener)
Solvent (for cleaning) - 1 litre (2 pints)
1,5mm (1/16") Diameter copper wire - 15m (50')
16mm (5/8") x No.8 brass screws - 200
20mm (3/4") x No.8 brass screws - 200
50,8mm (2") OD aluminum tube with 2,04mm (.08") wall - 4.9m (16')
50,8mm (2") OD auminum tube with 3,18mm (1/8") wall - 2,5m (8'3")
51mm (2") Diam Nylon or hardwood (mast plugs) - 0,26m (1')

Hardware
RWO R.204 inspection cover - 4
Rowlock guide plate and rowlock - 2
Ronstan RF134 saddle - 5
Ronstan RF181 block hanger - 1
Ronstan RF562 gooseneck - 1
Ronstan RF1253 or RF41111 block - 1
Ronstan RF1256 or RF41202 block - 1
Ronstan RF2515 pintle - 2
Ronstan RF2503 gudgeon - 2
RWO R.76/BG rudder retaining clip - 1
Ronstan RF559 U-bolt - 3
5mm (3/16") Braided rope 3m (10')
10mm (3/8") Braided rope - 5,5m (18')
Paint or varnish to suit

HOME : OVERVIEW : DESIGNS : ARTICLES: EMAIL


OUR CONTACT DETAILS

Click here to contact us by whatever method suits you.

This page was updated 25 February 2014

Web design by Dix Design