DUDLEY DIX YACHT DESIGN

Hout Bay 30

Radius chine steel cruiser

 

LIST OF MATERIALS FOR HULL & DECK

The following list of materials is approximate and intended only for calculation of approximate costs. It is not intended to be used for the ordering of exact quantities of materials for construction.

Lengths and areas are based on the actual amounts remaining in the vessel, without allowance for building stocks, temporary framing, bracing etc nor for wastage in cutting to size and shape as required.

This is a frameless boat so temporary station frames must be provided, additional to this list. The temporary frames can be made from scrap metal of rough timber, to suit what is available to each builder.

MATERIALS FOR STEEL CONSTRUCTION

3mm Plate - 59sq.m
3mm Plate (radiused) - 18sq.m
5mm Plate - 12sq.m
20mm Plate - 1sq.m
20x6mm Flat bar - 3m
30x8mm Flat bar - 156m
40x8mm Flat bar - 53m
50x8mm Flat bar - 7m
75X8mm Flat bar - 2m
50mm OD x 3mm tube - 6m
76mm OD x 3mm tube - 2m (Marconi only)

MATERIALS FOR ALUMINUM CONSTRUCTION

4.5mm Plate - 59sq.m
4.5mm Plate (radiused) - 18sq.m
8mm Plate - 12sq.m
16mm Plate - 1sq.m
75X12mm Flat bar - 2m
32x32x6mm Angle - 156m
40x40x6mm Angle - 53m
65x65x6mm Angle - 7m
50mm OD x 6.36mm tube - 6m
76mm OD x 6.36mm tube - 2m (Marconi only)

HOME : OVERVIEW : DESIGNS : ARTICLES: EMAIL


OUR CONTACT DETAILS

Click here to contact us by whatever method suits you.

This page was updated 20 May 2003

Web design by Dix Design