DUDLEY DIX YACHT DESIGN
Hout Bay 40
|
LIST OF MATERIALS FOR STEEL HULL & DECK |
| The following list of materials is approximate and intended only for calculation of approximate costs. It is not intended to be used for the ordering of materials for construction. Lengths and areas are based on the actual amounts to be used in the vessel without any allowance for wastage in cutting to size and shape as required. Wastage on flat bars, tubes etc will be minimal whereas that on plate will be dependent on the skill of the builder and will be in the range of 5% to 20%. |
| 3mm Plate - 55sq.m 4mm Plate - 56sq.m 4mm Plate rolled to 900mm radius - 10sq.m 6mm Plate - 13sq.m 12mm Plate - 0,60x3,20m 20mm Plate - 0,35x4,00m 30x6mm Flat bar - 90m 40x8mm Flat bar - 228m 50x6mm Flat bar - 22m 60x8mm Flat bar - 34m 70x6mm Flat bar - 28m 20x20x3mm Angle - 2m 50mm OD x3,0mm wall tube - 2m 76mm OD x5,0mm wall tube - 9m 102mm OD x5,0mm wall tube - 0,3m |
HOME : OVERVIEW : DESIGNS : ARTICLES: EMAIL
|
OUR CONTACT DETAILS |
This page was updated 4 May 2014
© Web design by Dix Design