DUDLEY DIX YACHT DESIGN

 

Little Creek 47 Swingkeel Version

 

LIST OF MATERIALS FOR STEEL HULL & DECK

The following list of materials is approximate and intended only for calculation of approximate costs. It is not intended to be used for the ordering of materials for construction.

Lengths and areas are based on the actual amounts to be used in the vessel without any allowance for wastage in cutting to size and shape as required. Wastage on flat bars, tubes etc will be minimal whereas that on plate will be dependent on the skill of the builder and will be in the range of 5% to 20%.
3mm Plate - 68sq.m
4mm Plate - 88sq.m
6mm Plate - 17sq.m
8mm Plate - 5sq.m
20mm Plate - 3sq.m
35x6mm Flat bar - 103m
40x6mm Flat bar - 31m
50x6mm Flat bar - 32m
80x6mm Flat bar - 44m
40x8mm Flat bar - 321m
75x8mm Flat bar - 36m
150x10mm Flat bar - 2m
45x12mm Flat bar - 2m
90x12mm Flat bar - 1m
16mm diam Bar - 2m
30mm diam Bar - 1m
64mm OD x4.5mm wall tube - 9m
102mm OD x6mm wall tube - 0.3m
76mm diam 316 s/s bar - 3.2m

Click here to go to Little Creek 47 page

HOME : OVERVIEW : DESIGNS : ARTICLES: EMAIL


OUR CONTACT DETAILS

Click here to contact us by whatever method suits you.

This page was updated 3 September 2002

Web design by Dix Design